Laerdal 911 Automated External Defibrillator

Specifications: ECG Input: Through self-adhesive disposable defibrillation electrodes Waveform Type: Truncated exponential Energy Selection: 200-300-360J Charging Time: 10 seconds nominal time to 360 Joules with a fully charged battery Treatable ECG: Ventricular fibrillation; amplitude greater than 200 µV peak to peak. Ventricular Tachycardia; QRS greater than 180 bpm. Analysis Time: Typical 6-9 seconds Voice Prompts Attach electrodes; press to analyze; stand clear; shock delivered; do not touch patient; press to shock; check pulse; stop CPR; if no pulse, start CPR; replace batteries; check electrodes; and check tape recorder. Voice Message Volume Low, medium or high controlled in the SETUP menu Display Type LCD character display with backlight. Size: 3 ¾” x 7/8” Controls 3 membrane switches Patient Cable 2.3 meter (7.5 feet) Internal Memory 150 seconds of prioritized ECG can be stored. Internal memory can be downloaded to Solid State Memory Module (MCM Plus) MCM Plus 1200 seconds (20 minutes) of prioritized ECG can be stored. MCM Plus Module Readers Modules are read and/or printed by Heartstart Quick Reporter/Charger Battery Rechargeable sealed lead acid battery Battery Capacity Typically more than 30 shocks at +20 degrees Celsius with new, fully charged battery Battery Charging Time Up to 16 hours for full charge Unit Weight: Less than 9 lbs, including installed battery Unit Size: 13.82 x 10.83 x 4 inches (l x w x h)